Planting Shelf controller is specially designed for growing shelf. And it can control led grow lighting,fans irrigation and and others.
Power supply: 12V-24V
Interface: two sets of three-channel dimming interface
Adaptation power supply type: 0-10V dimming power supply
Wiring: The signal output wires are common negative, and the other three channels should be wired according to the markings on the wire ends. The dimming output line is connected to the dimming signal line of the dimming power supply.
Fan and irrigation control:
Interface: a set of four-core interfaces (one positive and three negative)
Load: single load ≤ 3A, total load ≤ 5A (if you need to increase the load, you can connect a 24V adaptor at the lower end)
Wiring: The switch output lines are negative, and the other three lines should be wired according to the markings on the end of the line.
Note: Input voltage = output voltage. (If you use 12V power supply, the fan and water pump controlled by the output can only use the 12V voltage specification. If you use 24V power supply, the fan and water pump controlled by the output can use the 24V voltage specification.)
•Accessories: 1 switch output connector, 2 dimming signal connectors, 1 power adapter